How does a gas log lighter work?

How does a log lighter work? Just set the logs on the wood grate over the log lighter, turn the key to open the gas line, toss in a lit match, and the fire lights around your logs. After the logs have caught on fire, turn the valve key to close the gas line, and enjoy the crackling wood fire before you.

How do you use a log lighter valve?

Just set the logs on the wood grate over the log lighter, turn the key to open the gas line, toss in a lit match, and the fire lights around your logs. After the logs have caught on fire, turn the valve key to close the gas line, and enjoy the crackling wood fire before you.

How does a blue flame log lighter work?

A blue flame indicates that the burner is providing an air-fuel mix with sufficient oxygen for complete combustion right out of the nozzle. The flame burns the fuel completely to carbon dioxide and water. One house we lived in had a couple of decorative gas fireplaces which contained two different sets of burners.

What is the key for on a gas fireplace?

They burn cleaner than a traditional wood-burning fireplace and produce no ash or soot to clean up. Although many gas fireplaces have a knob or ignitor switch to light the fire, some older gas fireplaces units have a metal key that is inserted into a keyhole which turns on the gas flow to start the fire.

Which is better wood burning or gas fireplace?

In the battle for most efficient fireplace, gas fireplace efficiency is always going to win over wood fireplace efficiency. That’s because gas fireplaces burn more cleanly and produce fewer polluting emissions.

How do I know what kind of fireplace I have?

You can generally identify these units by simply looking inside the fireplace itself. They will be constructed of sheet metal, and usually 1-3 walls made of a ceramic material with a brick or stone pattern. Some units will have louvred faces for a blower to be used, but most do not.

Can I light my gas fireplace with a lighter?

Turn on the supply line to the gas fireplace. Light a match or butane candle lighter and hold it near the burner in the fireplace. Keep in mind that while gas fireplaces are safe when used properly, you need to turn off the valves and call a professional for help if you notice a heavy smell of gas when its in use.

How do you make a blue flame log lighter?

1. Light the burner by using a long fireplace match or a lit paper under the center of the lighter near the burner ports. 2. Turn the gas valve ON gradually until burner ignition occurs.

How do I know if I have a gas fireplace?

Consult the Fireplace Identification plate If you can’t see a plate that indicates the fireplace rating, check behind it. Alternatively, check the floor of the fireplace for any tag. If you still can’t see it, chances are your fireplace is the gas type (Gas fireplaces have a stamp on the gas supply).

Can a blue flame log lighter be used with natural gas?

When the Power Goes Out or anytime, increase heat in wood burning fireplace with the Blue Flame Log Lighter. For use with natural gas, this energy saving Blue Flame Log Lighter ensures safety for the end user by mixing air and gas together for a safer light up.

Can a log lighter be installed in a wood burning fireplace?

Log lighters can only be installed in zero clearance or masonry wood burning fireplaces. Universal Log Lighter – Has a hole on the end and on the side, so if your gas line comes up from the bottom or from the side of the fireplace, this log lighter will be able to attach to it easily.

Which is longer a gas log lighter pipe or a fireplace grate?

Your Gas Log Lighter Pipe should be no longer than the grate in your fireplace. It can be shorter than your fireplace grate, keeping in mind that along the pipe is where your flame will be, so even a pipe that sits mostly from the install side to half your grate will start your fire fine.

Where does the air mixer go in a propane burner?

The air mixer component will be installed just before the burner, but let’s start at the beginning to make things a little clearer. Your gas line will feed right into your shut off valve (“T” shaped), which is covered by a safety flange on one end of the “T”. A valve key is inserted into the flange to turn the gas pressure on and off.

How does a gas log lighter work in a fireplace?

Turn log lighter gas valve to the “off” position. Place logs on the fireplace grate allowing sufficient air space between logs for quick lighting. Light a long-stemmed fireplace match and hold it toward the center of the cast-iron burner ports. Turn the log lighter valve “on” gradually until ignition occurs.

Why do you need a blue flame log lighter?

Blue Flame log lighters will also help prevent build up of creosote caused by lack of proper draft at the early stage of lighting your wood burning fireplace. simplify the process of lighting your wood burning fireplace. Simple and easy to install if you already have a gas line to your fireplace (most units do have a gas line).

What’s the best way to light a fireplace?

Blue Flame Log Lighters are easy to use, simply turn on the gas and ignite. No more mess with paper and tiny pieces of wood kindling. Blue Flame log lighters also increase the performance of your chimney system by quickly heating the chimney causing it to start drafting much more quickly than conventional lighting of your wood burning fireplace.