How do you tell the tonnage of a Goodman air conditioner?
To calculate tonnage, divide the BTUs by 12,000, which is the weight of one refrigeration ton. For example, an unit with 48,000 BTUs has a tonnage of 4.
How can I tell how many tons my AC unit is?
Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3 ton unit. Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60.
How do you read a Goodman model number?
Goodman serial numbers are 10 digit numerical where the month and year are encoded in the first 4 digits. The year is the first 2 and the month the second 2. For example 1404123456 is manufactured is April 2014.
What is the life expectancy of a Goodman air conditioner?
A Goodman AC will last about 10–15 years before a compressor or coil failure. They are some of the cheaper but better than most units , in that list of inexpensive units.
Is Goodman as good as Trane?
Verdict. Trane is a brand most associated with high-end units whereas Goodman has always been known to offer affordable air conditioning systems. If you aren’t concerned with having a smart system or don’t need an unit with a high SEER rating than Goodman is a brand you will definitely want to keep in mind.
Is Goodman a good AC brand?
Goodman air conditioners are another of the top HVAC AC units on this list that isn’t quite as revered as Trane or Carrier. They are known for being cheaper in price range, but still being a good brand to rely on. Best of all, they’re a real value overall for one of the best ac units from this list.
How many tons is a Goodman air conditioner?
For Goodman, you should look for two numbers at the far side of the middle of the cluster of digits in the model number that are divisible by 6 or 12, which represent the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 48 divided by 12 equals 4, so the data plate below indicates the system is 4 tons.
How do you find the tonnage of a Goodman unit?
For Goodman, you should look for two numbers at the far side of the middle of the cluster of digits in the model number that are divisible by 6 or 12, which represent the nominal BTU of the system in thousands. How do I find out what year my Goodman unit is?
Where do I find the model number on my Goodman air conditioner?
The Goodman model number can be found on a tag located on the rating plate of your air conditioner or heat pump. Look at a slightly above the refrigerant valves on the back side of the A/C unit as show on the picture below.
What’s the difference between model number and Goodman serial number?
Although it sounds almost the same, there are differences between the serial number and the model number. Goodman serial number is very necessary when you want to check the warranty status of the Goodman air conditioner unit. While the model number is used to determine the tonnage size and the unit types.
For Goodman, you should look for two numbers at the far side of the middle of the cluster of digits in the model number that are divisible by 6 or 12, which represent the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 48 divided by 12 equals 4, so the data plate below indicates the system is 4 tons.
For Goodman, you should look for two numbers at the far side of the middle of the cluster of digits in the model number that are divisible by 6 or 12, which represent the nominal BTU of the system in thousands. How do I find out what year my Goodman unit is?
Where is the model number on a Goodman AC unit?
This number is located on a plate attached to the back of the unit, near the power supply and coolant lines. The model number includes the nominal cooling capacity in three digits beginning with zero. This three-digit number is the unit’s capacity measured in British Thermal Units.
How to calculate the tonnage of an air conditioner?
RLA is an acronym for R ated L oad A mperage, and is what the maximum amperage should be when the condenser up and running. If you divide the RLA by 6 for older units and 5 or 6 for newer units, you should get a number that approximates (not exactly) the tonnage of the system.
